Our Products include Bruce, Harris-Tarkett, Somerset, Hertco, Brill, Pergo etc. that can be installed as nail-down, glue-down, and floating floors. We can also install highly-customized inlaid hardwood flooring designs within your flooring. These designs can be created using most any combination of the hardwoods.
 |
Natural |  |
 |
Honey | |
 |
Cinnamon | |
 |
Hazelnut | |
 |
Maple | |
 |
Walnut | |
 |
Expresso | |
Types of Wood Flooring Finishes:
A) Oil-modified urethane is generally the most common surface finish and is easy to apply. It is solvent-based polyurethane that dries in about 8 hours. This type of finish ambers with age.
B) Water-based urethane is waterborne urethane that dries by water evaporation. These finishes are clear and non-yellowing. They have a milder odor than oil-modified finishes have and they dry in about two to three hours. Water-based urethane is generally more expensive.
C) Moisture-cure urethane is solvent-based polyurethane that is more durable and more moisture resistant than other surface finishes. Moisture-cure urethane comes in non-yellowing and in ambering types and is generally available in satin and gloss. These finishes are extremely difficult to apply, have a strong odor and are best left to the professional.
Types of Wood Flooring:
A) Unfinished Wood Flooring: Unfinished flooring is a product that must be job-site sanded and finished after installation.
B) Pre-finished Wood Flooring:
Pre-finish wood flooring is factory-sanded and finished flooring that only needs installation.
C) Solid Wood Flooring:
Solid wood flooring is completely lumber. It is available in unfinished and pre-finished. Solid wood flooring is produced in planks and installed in a nail down method.
D) Engineered Wood Flooring: Bonding layers of veneer and lumber with an adhesive product in strips, planks and parquet.
E) Pergo Laminate flooring:
A wide variety of glueless laminate plank floors and pre-applied glue laminate floor in many different hardwood, stone and tile designs.
